BUILD A MOUNT
Copyright © 2025 National Products Inc. Seattle, Washington. All rights reserved.
RAM® Large Marine Electronics Mount - D Size Medium
D Size
Medium Arm
$189.49
Overview
The RAM-D-111U consists of a medium double socket arm, 3.68" diameter round base, and 11" x 3" rectangle base. The round base includes a 2.25" D size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 2.25" D size rubber ball and contains a variety of pre-drilled holes that are compatible with several large marine electronic devices, including fishfinders and chartplotters. Included are four shoulder washers that allow smaller hardware to fit properly in the large holes of this plate.
Features
- Complete flat surface, drill-down mounting solution for large marine electronics with an overall height of 11.5"
- RAM® Mounts ball and socket technology allows for near-infinite adjustability
- Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
hardware included:
(4) .312" x .187" Shoulder Washers
product dimensions:
Overall Height: 11.5"
socket to socket length:
6.88"
hole pattern:
See Drawings
plate size:
Top Plate: 3" x 11"
Bottom Plate: 3.68" Diameter
ball size:
D Size (2.25")
weight capacity:
Standard Use: 6 lbs
Heavy-Duty Use: 5 lbs
materials:
Marine-grade aluminum
packaging type:
Poly Bag
Weight:
4.65 lb
Additional Information:
The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
Questions & Answers
Have a Question?
-
What screws are used to attach the RAM Mount to the gimbal bracket?
Typically the gimbal bracket included with your fishfinder will also come with mounting screws that should connect to the RAM® mounting plate. As these mounts are universal and are for many different applications, the necessary hardware needed for each application will vary. For marine applications, RAM® recommends stainless steel hardware to prevent corrosion.
-
What are the 4 shoulder washers used for?
The four included shoulder washers are meant to accommodate smaller screws in case the original holes on the ball plate are too large. These washers will reduce the risk of smaller screw heads stripping through the larger holes, and can be used with any of the holes on the ball plate.
-
is this compatible or will it work with a humminbird solix 10 (bow mount)
For you Humminbird Solix 10 you will want to look at RAM® Drill-Down Ball Mount for Humminbird Helix 8-10 & XPLORE Series – RAM Mounts